bt0330p000201a

Bolt for driven plate, flywheel, sheet metal two-mass flywheel standardized

Tip bt · temă 03.30 · versiune 0102 · 1998-03-16

Valabil pentru: ENGINE 111 as of 1.5.95, 604 as of 1.11.95, 605, 606 as of 1.5.95

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 1 Motor › 03 Mecanism de acţionare › 03.30 Volantă, disc antrenor, amortizor vibraţii, bendix

EinPAS 15 Motor › 15.15 Motor cu ardere internă complet/Carcasă motor/Mecanism bielă-manivelă › 15.15.41 Arbore cotit/Volantă/Flanșă de antrenare

Valabil și pentru motoare/cutii de viteze: 111 ***, 604 ***, 605 ***, 606 ***

ENGINE 111 as of 1.5.95,
604 as of 1.11.95,
605, 606 as of 1.5.95

BT03.30-P-0002-01A

Bolt for driven plate, flywheel, sheet metal two-mass flywheel standardized

ENGINE 111, 604, 605, 606

Bolt for driven plate, flywheel, sheet metal two-mass flywheel standardized
Bolt for driven plate, flywheel, sheet metal two-mass flywheel standardized

P03.30-0243-01

P03.30-0242-01

Stretch shank bolt (A) part no.
102 032 00 71 is replaced by an internal torx bolt (B) T55 part no. 111 990 03 12.

The internal torx bolt (B) T55 should be replaced when performing repairs.

Length (L) bolt (A)=22 mm

Length (L) bolt (B)=28.5mm