AZ88.40-P-0002FF | Retrofit air inlet grate | 3.8.05 |
MODEL 454.0 from 6.6.05
MODEL 454.0 up to 5.6.05
When replacing engine hood
P88.40-2610-06
1 Air inlet grate
2 Adhesive tape
3 Adhesive tape
Dimension
A 11 mm
| Install | ||
1 | Clean engine hood in area of air inlet grate (1) | The sealing surface must be free of dust and grease. | |
2 | Glue suitable adhesive tape (2) along dotted line (arrow A) on upper bead | ||
3 | Glue suitable adhesive tape (2) along dotted line (arrow B) on crimped bead | ||
4 | Remove protective foil on adhesive strips on rear of air intake grate (1). | ||
5 | Position air intake grate (1) on adhesive tape (3) (arrow C) and glue on at distance (a) from adhesive tape | ||
6 | Remove adhesive tape (2, 3) |