az8264d000107a

Retrofitting CD changer in seat frame

Tip az · temă 82.64 · versiune 0100 · 2006-10-31

Valabil pentru: MODEL 901, 902, 903, 904, 905 with CODE (EF6) Radio Sound 20 with CODE (EF7) Radio Sound 30 with CODE (ET8) Sound 30 Auto-Pilot-System (APS)

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 3 Suprastructură › 82 Instalaţie electrică, structură › 82.64 Magazie de CD-uri — Seria 901 · Seria 902 · Seria 903 · Seria 904 · Seria 905

EinPAS 31 Comunicaţie/Informaţie/Entertainment › 31.67 Redare pe suport media/Suport de date › 31.67.3 Montare ulterioară/Modificare — Seria 901 · Seria 902 · Seria 903 · Seria 904 · Seria 905

AZ82.64-D-0001-07A

Retrofitting CD changer in seat frame

Model 901, 902, 903, 904, 905 with CODE EF6, EF7, ET8 (Radio Sound 20, 30 or 30 APS)

Repair materials

Number

Designation

Order number

BR00.45-Z-1014-01A

Adhesive tape

A 000 989 98 85

Retrofitting CD changer in seat frame

D82.64-1104-01

1 Install retaining brackets (1) on CD changer (2) with two screws each.

Retrofitting CD changer in seat frame

D82.64-1105-01

2 Position CD changer on floor of seat frame and align with side access opening.

When aligning CD changer observe removal and installation of CD magazine. Ensure that there is sufficient space in the area of the side access opening.

3 Mark two mounting holes each for retaining brackets on the floor.

4 Drill cab floor with 3.5 mm bit at marked points.

5 Screw CD changer to vehicle floor with sheet metal screws.

Coat threads of sheet metal screws with sealant before screwing in to protect against water and corrosion.