Retrofitting CD changer wiring harness

Tip az · temă 82.64 · versiune 0100 · 2001-05-10

Valabil pentru: MODEL 901, 902, 903, 904, 905 with CODE (EF6) Radio Sound 20 with CODE (EF7) Radio Sound 30

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 3 Suprastructură › 82 Instalaţie electrică, structură › 82.64 Magazie de CD-uri — Seria 901 · Seria 902 · Seria 903 · Seria 904 · Seria 905

EinPAS 31 Comunicaţie/Informaţie/Entertainment › 31.67 Redare pe suport media/Suport de date › 31.67.3 Montare ulterioară/Modificare — Seria 901 · Seria 902 · Seria 903 · Seria 904 · Seria 905

AZ82.64-D-0001-01A

Retrofitting CD changer wiring harness

Model 901, 902, 903, 904, 905 with CODE EF6, EF7 (Radio Sound 20 or 30)

D82.64-1102-02

1 Route wiring harness (1) for CD changer for connecting to plug location C of radio upward below instrument panel and route connector out of radio installation shaft.

2 Route wiring harness (1) for CD changer for connecting to CD changer on cab floor toward rear and route into seat frame at side.

 Connect wiring harness to present leads and wiring harnesses and route on cab floor in gap between insulating mats glued on. Fasten wiring harness to cab floor with strips of adhesive tape.Avoid chafing points, if necessary install chafe guard.