P98.00-0308-01
1 Remove roof (hardtop).
2 Remove trim frame with rubber seal and plastic clips on side roof fold.
3 Remove trim frame with upper and lateral rubber seals on rear window.
4 Remove rubber seal on the contact surface - windshield.
5 Mask rear window with masking paper.
6 Tape duct between rear window and roof cutout on the guide rail of the rubber seal with adhesive tape, 38 mm wide.
P98.00-0310-01
P98.00-0309-01
7 Tape lateral body fold and rear metal clips with adhesive tape, 38 mm wide.
8 Tape contact surface - at top of windshield with overlapping adhesive tape, 38 mm wide.
9 After masking the underside of the roof, stick overlapping adhesive tape on masking paper.
P98.00-0312-01
P98.00-0311-01
10 Mask roof (hardtop) all around with masking paper.