ar9800p020004d

Masking when painting front fender

Tip ar · temă 98.00 · versiune 0102 · 2004-04-30

Valabil pentru: MODEL 168

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 3 Suprastructură › 98 Lăcuire › 98.00 Generalităţi — Seria 168

EinPAS 40 Conservare/Vopsire › 40.15 Vopsire/Întreţinere vopsea › 40.15.31 Vospire suport metalic — Seria 168

EinPAS 40 Conservare/Vopsire › 40.15 Vopsire/Întreţinere vopsea › 40.15.40 Vospire suport sintetic — Seria 168

AR98.00-P-0200-04D

Masking when painting front fender

Cleaning plastic cover plates of lamps

Models 168, 171, 203, 208, 209, 210, 211, 215, 220, 230, 240

AH82.10-P-1002-01A

Masking when painting front fender
Masking when painting front fender
Masking when painting front fender

P98.00-1008-01

P98.00-1009-01

P98.00-1010-01

1 Removing decorative trim (1) and turn signal lamp (2).

2 Mask headlamp with cardboard (3).

Headlamps are made from plastic.

3 Mask front fender bead all the way around with overlapping
50 mm adhesive tape.
Stick adhesive tape onto adjacent surfaces.

Front fenders are made from plastic. Maintain distance of at least 80 cm when drying with infrared radiator.

4 Mask turn signal lamp opening with masking paper.

5 Cover the entire vehicle with masking paper.

Documente menționate