P98.00-0215-01
1 Remove turn signal lamp and side paneling with clips.
2 Mask front fender channel all the way around overlapping with 50 mm wide masking tape.
Mask adjacent surfaces with masking tape.
3 Cover turn signal lamp opening with masking paper.
4 Mask bumper with 50 mm wide masking tape.
P98.00-0216-01
5 Cover complete vehicle with masking paper.
After completion of the painting (before drying) remove the tape (1), so that the wet paint can run at the transition without an edge.
When parts are replaced paint wheelhouse with MB 7 129 galinite gray after applying permanent underbody protection agent (synthetic rubber or water-based dispersion).