Remove/install release handle on mounting bracket for bed extension

AR91.75-S-9873E

Remove/install release handle on mounting bracket for bed extension

03.09.2015

Model

447.7

with code ZH6 (Marco Polo ACTIVITY)

Model

447.8

with code V9B (FUN 2 package: sleep)

except code ZK7 (Equipment line MARCO POLO)

1

Handle

2

Bolt with washer

3

Assembly wedge

4

Pin

5

Axle



Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S



Remove

1

Remove bed extension and set down on clean base with sleeping surface facing downwards

AR91.75-S-0010EE

2

Move handle (1), as shown, into unlock position

3

Remove screw/bolt with washer (2)

If installed.

4

Pry off handle (1) using an assembly wedge (3) and remove

 In the process, the handle (1) is destroyed and must always be replaced.

 Mounting wedge

*110589035900

5

Press down pin (4) (arrow A) and at the same time use suitable pliers to pull axle (5) out of pin (4)



Install

6

Insert axle (5) in the new handle (1)

7

Position handle (1) at pin (4)

8

Press down pin (4) (arrow A) and at the same time use suitable punch to press axle (5) into pin (4) until axle (5) is lined up with handle (1) (arrow B)

 Helper required for pressing down pin (4).

9

Tighten screw/bolt with washer (2)

10

Install bed extension

AR91.75-S-0010EE



Check

11

Check operation of unlocking and locking mechanism