Remove/install side Supplemental Restraint System (SRS) pressure sensor

AR91.60-S-0760E

Remove/install side Supplemental Restraint System (SRS) pressure sensor

05.11.2019

Model

447, 448

with code SH8 (Windowbags for driver, front passenger and rear)

Model

447

with code ZU7 (National version for Canada)

Model

447

with code ZU8 (National version for USA)

Model 447 with code ZU8 (USA national version) or with code ZU7 (Canada national version)

1

Electrical connector

B48/7

Left front door pressure sensor

B48/8

Right front door pressure sensor

2

Bolts

With code SH8 (Windowbags for driver, front passenger and rear)

3

Electrical connector

B165

Left sliding door pressure sensor

B165/1

Right sliding door pressure sensor

4

Rivets

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

 

Remove/install

1

Switch off ignition and remove transmitter key

2

Remove door trim from respective front door

Model 447
with code ZU7 (National version for Canada)
Model 447
with code ZU8 (National version for USA)
When removing the left front door pressure sensor (B48/7) and the right front door pressure sensor (B48/8).

AR72.10-S-6575E

3

Disconnect electrical connection (1)

Model 447
with code ZU7 (National version for Canada)
Model 447
with code ZU8 (National version for USA)
When removing the left front door pressure sensor (B48/7) and the right front door pressure sensor (B48/8).

4

Remove screws/bolts (2) and left front door pressure sensor (B48/7) or right front door pressure sensor (B48/8)

Model 447
with code ZU7 (National version for Canada)
Model 447
with code ZU8 (National version for USA)
When removing the left front door pressure sensor (B48/7) and the right front door pressure sensor (B48/8).

5

Remove door trim of respective sliding door

Model 447
with code SH8 (Windowbags for driver, front passenger and rear)
When removing the left sliding door pressure sensor (B165) or right sliding door pressure sensor (B165/1).

AR72.16-S-6610E

6

Detach door foil until left sliding door pressure sensor (B165) or right sliding door pressure sensor (B165/1) is accessible

Model 447, 448
with code SH8 (Windowbags for driver, front passenger and rear)
When removing the left sliding door pressure sensor (B165) or right sliding door pressure sensor (B165/1).

7

Disconnect electrical connector (3)

Model 447, 448
with code SH8 (Windowbags for driver, front passenger and rear)
When removing the left sliding door pressure sensor (B165) or right sliding door pressure sensor (B165/1).

8

Drill out rivets (4)

Model 447, 448
with code SH8 (Windowbags for driver, front passenger and rear)
When removing the left sliding door pressure sensor (B165) or right sliding door pressure sensor (B165/1).

General information on riveting

AH60.00-P-0003-01N

 Rivet milling cutter

*171589003900

9

Remove left sliding door pressure sensor (B165) or right sliding door pressure sensor (B165/1)

Model 447, 448
with code SH8 (Windowbags for driver, front passenger and rear)
When removing the left sliding door pressure sensor (B165) or right sliding door pressure sensor (B165/1).

10

Completely remove rivet residue and chips from sliding door

Model 447, 448
with code SH8 (Windowbags for driver, front passenger and rear)
When removing the left sliding door pressure sensor (B165) or right sliding door pressure sensor (B165/1).


Completely remove rivet residues.
The rivet residue can otherwise cause corrosion damage to the sliding door.

11

Install in the reverse order



Check

12

Check Supplemental Restraint System (SRS) with diagnostic system

If the left front door pressure sensor (B48/7) or right front door pressure sensor (B48/8) or left sliding door pressure sensor (B165) or right sliding door pressure sensor (B165/1) has been replaced.



AD00.00-S-2000-04E