ar9160p0615gl

Remove/install airbag control unit

Tip ar · temă 91.60 · versiune 0111 · 2018-05-07

Valabil pentru: Model 461.302/304/305/332/333/334/340/342/343/344/345/346/392 up to model year 2014

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 3 Suprastructură › 91 Scaune, cuşete, sistem de siguranţă pasivă › 91.60 Airbag, protecţie pietoni — Seria 461 (modele 302, 304, 305, 332, 333, 334, 340, 342, 343, 344, 345, 346, 392)

EinPAS 27 Siguranţă pasivă/Sisteme de siguranţă pasivă › 27.16 Airbag › 27.16.11 Calculator/Releu — Seria 461 (modele 302, 304, 305, 332, 333, 334, 340, 342, 343, 344, 345, 346, 392)

EinPAS 27 Siguranţă pasivă/Sisteme de siguranţă pasivă › 27.17 Sistem siguranţă pasivă › 27.17.11 Calculator/Releu — Seria 461 (modele 302, 304, 305, 332, 333, 334, 340, 342, 343, 344, 345, 346, 392)

AR91.60-P-0615GL

Remove/install airbag control unit

25.04.2018

Model

461.302/304/305/332/333/334/340/342/343/344/345/346/392

up to model year 2014

Remove/install airbag control unit

N2/7

Restraint systems control unit

P54.21-2277-05

Remove/install airbag control unit

7

Nuts

N2/7

Restraint systems control unit

P54.21-2278-01

Warning

Risk of injury during testing and repair operations related to pyrotechnical components

Do not expose pyrotechnical component parts to temperatures above 100 °C or 212 °F. Disconnect current supply when working on such component parts.

AS91.00-Z-0008-01A

Topical note

Notes on self-locking nuts and bolts

AH00.00-N-0001-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Information, assessment and legal requirements when working with, handling and storing pyrotechnical components

AH91.00-Z-0000-10A

Remove/install

1

Switch off ignition and remove transmitter key

2

Disconnect battery ground line

AR54.10-P-0003GL

In vehicles with a 12 V or 24 V on-board electrical system, all ground lines must be disconnected for safety reasons.

3

Remove floor selector


Model 461.302/304/305/332/333/334/340/342/343/344/345/346/392 with transmission 722.6
up to model year 2014

AR27.60-P-0900GL

4

Unscrew relay holder

5

Unscrew nuts (7)

Nut, control unit to body

*BA91.60-P-1004-01B

6

Raise restraint systems control unit (N2/7) a little

7

Release and disconnect electrical connector at the restraint systems control unit (N27)

8

Remove restraint systems control unit (N2/7)

9

Install in the reverse order

Check

10

Perform SCN coding of restraint systems control unit (N2/7)

When replacing the restraint systems control unit (N2/7).

AR54.21-P-0015X

11

Perform initial startup of restraint systems control unit (N2/7)

When replacing the restraint systems control unit (N2/7).

12

Check and erase vehicle fault memory using the diagnostic system

When replacing the restraint systems control unit (N2/7).

AD00.00-P-2000-04A

Airbag

Number

Designation

Model 461

BA91.60-P-1004-01B

Nut, control unit to body

Nm

10

Documente menționate