1 | Electrical connector |
2 | Airbag unit |
3 | Bolts |
D91.60-1136-03
Warning | Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units. | Store airbag units with deployment side facing up; do not expose to temperatures greater than 100 °C. When working on these units, disconnect the power supply. | |
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
Topical note | Notes on carrying out repair work in the vehicle interior | ||
Topical note | Notes on performing repair, body work and welding on vehicles with airbags and RTE units | ||
Assessment of airbag and belt tensioner units in accident vehicles | |||
Information, assessment and legal requirements when working with, handling and storing pyrotechnical components | |||
| Remove/install | ||
1 | Switch off ignition and remove ignition key | ||
Danger | Risk of explosion from explosive gas. Risk of poisoning and caustic burns from swallowing battery electrolyte. Risk of injury through burns to skin and eyes from battery acid or when handling damaged lead-acid batteries | No fires, sparks, open flames or smoking. Wear acid-resistant gloves, clothing and glasses. Only pour battery acid into suitable and appropriately marked containers. | |
2 | Disconnect battery ground line | ||
Topical note | Notes on battery | ||
3 | Remove screws (3) | Bolt, airbag to steering wheel | |
Screwdriver bit | |||
4 | Remove airbag unit (2) from steering wheel and disconnect electrical connector (1) from squib at gas generator | Installation: Make sure that electrical connector (1) engages properly. | |
5 | Properly dispose of airbag unit (2) | When replacing the airbag unit (2). | |
6 | Replace steering wheel | Only if the airbag unit (2) was triggered. | |
7 | Install in the reverse order | ||
8 | Connect diagnostic system and perform quick test | ||
| |||
9 | Read out fault memory and clear if necessary | ||
| |||
10 | Set time on instrument cluster | ||
11 | Set time on timer for auxiliary heater | Model 909 |
126 589 00 10 00
Screwdriver bit
Documente menționate
- ad0000d200004f
- ah5400p000101a Indicaţii pentru evitarea defectării componentelor electronice prin descărcare electrostatică
- ah5410p000101a Indicaţii pentru acumulator
- ah5410p000101a
- ah6800n000101s Indicaţii pentru efectuarea operaţiilor de reparare în interiorul autovehiculului
- ah9100p000201m Indicaţii pentru efectuarea de reparaţii şi operaţii de sudură şi de caroserie la vehiculele cu unităţi de airbag sau întinzător centură
- ah9100p000601b Evaluarea unităţilor airbag şi întinzător de centură la autovehicule care au suferit accidente
- ah9100z000010a Indicaţii, evaluări şi dispoziţii legale referitoare la lucrări, manevrarea şi depozitarea de componente pirotehnice
- ar4610d0100fa
- as5410z000101a Pericol de incendiu/explozie, ca urmare a scurtcircuitului și a gazului detonant evacuat. Pericol de combustie/pericol de rănire, ca urmare a iritării ochilor, a pielii şi a mucoasei, ca urmare a electrolitului de acumulator/vaporilor
- as9100z000101a Pericol de rănire la lucrări de verificare respectiv de reparaţie la unităţile airbag sau întinzător de centură