P91.40-3159-06
Shown on left side of vehicle
1 Seat belt
2 Screw
3 Belt end fitting
4 Automatic belt retractor
5 Bracket
6 Screw
7 Seat belt guide bracket
8 Seat belt guide
9 Screw
10 Guide
11 Screw
R12/6 Left rear emergency tensioning retractor squib
R12/7 Right rear emergency tensioning retractor squib
X28/47 Left rear emergency tensioning retractor squib electrical connector
X28/48 Right rear emergency tensioning retractor squib electrical connector
| Remove/install | ||
Danger! | Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units. | Store airbag units with deployment side facing up; do not expose to temperatures greater than 100 °C. When working on these units, disconnect the power supply. | |
Danger! | Risk of injury caused by release of spring in the automatic belt retractor is released. | Never disassemble automatic belt retractors. | |
Danger! | Risk of injury caused by moving parts that can pinch, crush or, in extreme cases, even sever extremities | No parts of the body or limbs should be within the operating range of the mechanism when moving components. | |
| Notes on performing repair, body work and welding on vehicles with airbags and ETR units | ||
| Legal requirements on handling and storing airbags and emergency tensioning retractor units | ||
| Assessment of airbag and belt tensioner units in accident vehicles | ||
1 | Open soft top | ||
2 | Open soft top compartment cover | ||
3 | Switch off ignition and remove transmitter key or KEYLESS-GO start/stop button from electronic ignition lock control unit | KEYLESS-GO start/stop button only with code (889) Keyless-Go | |
4 | Disconnect battery ground line | ||
5 | Remove rear seat backrest | ||
6 | Remove screw/bolt (11) and remove bracket (5) | ||
7 | Remove screw/bolt (6) at guide fitting (7) | | |
8 | Unclip belt guide (8) | Press catch hook (arrow A), remove belt guide (8) by means of pivoting movement (arrow B). | |
9 | Disconnect left rear emergency tensioning retractor squib electrical connector (X28/47) at left rear emergency tensioning retractor squib (R12/6) or right rear emergency tensioning retractor squib electrical connector (X28/48) at right rear emergency tensioning retractor squib (R12/7) | ||
10 | Remove screw/bolt (9) at automatic belt retractor (4) | | |
11 | Remove seat belt (1) with automatic belt retractor (4) | Installation: Insert and position automatic belt retractor (4) in guide (7). | |
If the automatic belt retractor (4) is replaced, the faulty automatic belt retractor (4) must be disposed of properly. Refer to: | |||
| Notes on disposing of airbag and emergency tensioning retractor units | ||
12 | Install in the reverse order | ||
13 | Check supplemental restraint system (SRS) with STAR DIAGNOSIS | After replacing the automatic belt retractors (4) with seat belt (1). | |
| Connect STAR DIAGNOSIS and read out fault memory |
Seat belts/emergency tensioning retractors
Documente menționate
- ad0000p200004a Conectaţi STAR DIAGNOSIS, citiţi memoria de erori
- ad0000p200004a
- ah9100p000201m Indicaţii pentru efectuarea de reparaţii şi operaţii de sudură şi de caroserie la vehiculele cu unităţi de airbag sau întinzător centură
- ah9100p000401a Reglementări legale privind manipularea şi depozitarea unităţilor airbag şi întinzător de centură
- ah9100p000601b Evaluarea unităţilor airbag şi întinzător de centură la autovehicule care au suferit accidente
- ar5410p0003ew Deconectare, conectare cablu de masă acumulator
- ar9112p1620ea
- as0000z000901a Pericol de rănire prin prinderea sau strivirea, în caz extrem prin tăierea membrelor în timpul manipulării sistemului mecanic
- as9100z000101a Pericol de rănire la lucrări de verificare respectiv de reparaţie la unităţile airbag sau întinzător de centură
- as9100z000201a Pericol de rănire prin detensionarea arcului dispozitivului de rulare automată a centurii
- os9100p000101a