ar9125p1820tx

Removing and installing dynamic seat switch

Tip ar · temă 91.25 · versiune 0100 · 2004-11-04

Valabil pentru: MODEL 219.3 with CODE (433) Left dynamic seat, incl. multicontour seat with CODE (434) Right dynamic seat, incl. multicontour seat

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 3 Suprastructură › 91 Scaune, cuşete, sistem de siguranţă pasivă › 91.25 Scaun multi-contur (MKS) — Seria 219 (modele 3**)

EinPAS 37 Echipament interior › 37.26 Scaun faţă › 37.26.12 Senzor/Comutator/Cablaj — Seria 219 (modele 3**)

AR91.25-P-1820TX

Removing and installing dynamic seat switch

24.9.04

MODEL 219.3
with CODE (433) Left dynamic seat, incl. multicontour seat
with CODE (434) Right dynamic seat, incl. multicontour seat

Removing and installing dynamic seat switch

Shown on removed driver seat

1 Front seat frame trim

S108 Right front multicontour backrest switch group

S108/1 Right front DYNAMIC switch

S109 Left front multicontour backrest switch group

S109/1 Left front DYNAMIC switch

P91.25-2271-03

Remove/Install

1

Set left or right front seat to the rear and up

See Operating Instructions

2

Unclip right front multicontour backrest switch group (S108) or left front multicontour backrest switch group (S109) from the paneling of the front seat frame (1) using mounting wedge and lift up

*110589035900

3

Disconnect electrical connector from the right front multicontour backrest switch group (S108) or left front multicontour backrest switch group (S109)

4

Press the right front DYNAMIC switch (S108/1) or left front DYNAMIC switch (S109/1) from the rear out of the paneling of the front seat frame (1) and disconnect the electrical connector

5

Install in the reverse order

Removing and installing dynamic seat switch

Mounting wedge

110 589 03 59 00