ar8840p1000f

Opening engine hood, moving to upright position, closing

Tip ar · temă 88.40 · versiune 0104 · 1999-02-15

Valabil pentru: MODEL 210, 208.3 /4

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 3 Suprastructură › 88 Piese detaşabile, capac exterior › 88.40 Capotă motor, capotă faţă — Seria 208 (modele 3**, 4**) · Seria 210

EinPAS 35 Caroserie/Şasiu/Piese detaşabile › 35.36 Capotă/Clapetă/Capac › 35.36.30 Capotă motor — Seria 208 (modele 3**, 4**) · Seria 210

AR88.40-P-1000F

Opening engine hood, moving to upright position, closing

15.12.94

MODEL 210, 208.3 /4

Opening engine hood, moving to upright position, closing

P88.40-0235-06

Illustrated on model 210

1 Lever

2 Handle

3 Locking lever

4 Edges (engine hood)

Opening

Danger!

Risk of injury from fingers being pinched or jammed when removing and installing and aligning hoods, doors, trunk lids/tailgates and sliding roof

When moving components ensure that no body parts or limbs are in the area of motion.

AS00.00-Z-0011-01A

1

Pull lever (1) on left below instrument panel to release engine hood

Handle (2) comes out of radiator cowl, lift engine hood slightly.

2

Pull handle (2) out of grille until it reaches the stop and open engine hood

Do not lift with handle.
Ensure that windshield wiper arm is not folded toward front.

Moving to upright position

3

Pull engine hood in closing direction, press locking lever (3) on right engine hood hinge in direction of arrow and move engine hood to upright position.

A locking lever (3) is located only on the right engine hood hinge.

Closing

4

Press locking lever (3) on right engine hood hinge in direction of arrow and close engine hood until locking lever (3) engages.

5

Close engine hood.

Position hands on edges (4) only. Check locking function after closing engine hood, for this purpose pull engine hood upward with jerk.

Documente menționate