Remove/install front bumper

AR88.20-P-2000CY

Remove/install front bumper

28.10.15

Model

204.9

Modification notes

25.9.15

"Calibrate front 360° camera using the diagnostic system" added.

Operation step 12

Shown right side of vehicle with removed inner fender

1

Bumper

5

Screw

E5/1

Left fog lamp

2

Fender

6

Bracket

E5/2

Right fog lamp

3

Bolts

7

Screw

X26/27

Front bumper PARKTRONIC electrical connector (with Code 220 (PARKTRONIC))

4

Electrical connector

8

Radiator grille



Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

 

Remove/install

1

Remove front engine compartment paneling

AR61.20-P-1105CY

2

Unscrew bolts (5) on left and right side of vehicle

3

Disconnect electrical connector (4) from left front fog lamp (E5/1) and right front fog lamp (E5/2)

4

Loosen left and right fender liner in area of bumper (1) and pry out from bumper (1) with assembly wedge

 Mounting wedge

*110589035900

5

Unscrew bolts (3) on left and right side of vehicle

6

Disconnect Parktronic electrical connector from front bumper (X26/27)

Model 204.9
with code 220 (PARKTRONIC)

7

Loosen radiator grille (8)

AR88.40-P-4001CY

 Radiator grille (8) remains on bumper (1).

8

Unscrew bolts (7) on left and right side of vehicle

9

Remove bumper (1) with radiator grille (8)

AR60.00-P-0700-01WX

 Installation: Check gap dimensions on bumper (1).

Gap dimension

*BE60.00-P-1001-01U

 Mounting wedge

*110589035900

 Feeler gauge

*129589032100

In the event of complaints



Adjust bumper (1)

10

Install in the reverse order



Check

11

Check adjustment of left front fog lamp (E5/1) and right front fog lamp (E5/2)



AP82.10-P-8260CW

In the event of complaints



Correct adjustment

Calibrate

12

Calibrate front 360° camera using the diagnostic system

Model 204.9
with code 501 (360° camera)



AD00.00-P-2000-04A

Check values for gap dimensions

Number

Designation

Model 204.9

BE60.00-P-1001-01U

Gap dimension

Engine hood to fender

Dimension "A"

mm

4 (1)

Engine hood to headlamp

Dimension "B"

mm

4 (1)

Engine hood to radiator grille

Dimension "C"

mm

–

Engine hood to bumper

Dimension "D"

mm

6 (+3/-1)

Engine hood to A-pillar

Dimension "E"

mm

4 (+1,5/-1)

Bumper to headlamp

Dimension "F"

mm

3 (+2/-1)

Picture

AR60.00-P-0700-01WX