ar8810p1400gz

Remove/install fender liner in rear fender

Tip ar · temă 88.10 · versiune 0101 · 2005-11-30

Valabil pentru: MODEL 164

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 3 Suprastructură › 88 Piese detaşabile, capac exterior › 88.10 Aripă — Seria 164

EinPAS 35 Caroserie/Şasiu/Piese detaşabile › 35.37 Aripă › 35.37.40 Contraaripă — Seria 164

AR88.10-P-1400GZ

Remove/install fender liner in rear fender

23.11.05

MODEL 164

Remove/install fender liner in rear fender

P88.10-2141-06

Shown on model 164.1

1 Fender liner in rear fender

2 Nuts

3 Expansion rivets

Remove/install

Danger!

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between the columns of the lifting platform and position the four support plates at the lifting platform support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

1

Lift/jack up vehicle

AR00.60-P-1000GZ

2

Unscrew nuts (2).

On model 164.1 unscrew three nuts (2).

On model 164.8 unscrew two nuts (2).

3

Remove expansion rivets (3)

On model 164.1 remove three expansion rivets (3) at rear.

On model 164.8 remove six expansion rivets (3) at rear.

4

Loosen fender liner in rear fender (1) from rear fender with mounting wedge.

Installation: Ensure that fender liner is seated correctly in rear fender.

Mounting wedge

*110589035900

5

Install in the reverse order

Remove/install fender liner in rear fender

Mounting wedge

110 589 03 59 00

Documente menționate