Remove/install extinguishing agent reservoir covering

Tip ar · temă 86.10 · versiune 0103 · 2019-02-25

Valabil pentru: Model 463.236/248 up to model year 2019 with code 979 (Special protection MB Guard) with code ZS6 (Special protection version FB6) with fire extinguishing system Model 463.236/248 up to model year 2019 with code 979 (Special protection MB Guard) with code ZS7 (Special protection version FB7) with fire extinguishing system Model 463.242 up to model year 2019

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 3 Suprastructură › 86 Echipamente de urgenţă, echipare adecvată pentru persoane cu handicap, echipament sanitar, bucătărie › 86.10 Echipamente de urgenţă — Seria 463 (modele 236, 242, 248)

EinPAS 27 Siguranţă pasivă/Sisteme de siguranţă pasivă › 27.21 Instalaţie de stingere incendiu/Instalaţie semnalizare incendiu › 27.21.50 Recipient — Seria 463 (modele 236, 242, 248)

AR86.10-P-0103A

Remove/install extinguishing agent reservoir covering

17.01.2019

Model	463.236/248
	up to model year 2019
	with code 979 (Special protection MB Guard)
	with code ZS6 (Special protection version FB6)
	with fire extinguishing system
Model	463.236/248
	up to model year 2019
	with code 979 (Special protection MB Guard)
	with code ZS7 (Special protection version FB7)
	with fire extinguishing system
Model	463.242
	up to model year 2019

Remove/install extinguishing agent reservoir covering

Left extinguishing agent tank trim is shown

1	Extinguishing agent tank trim

P86.10-2102-11

 	Remove/install
1	Remove upper section of extinguishing agent tank trim (1)
2	Remove extinguishing agent tank trim (1) from vehicle
3	Disconnect side pieces of extinguishing agent tank trim (1) from each other
4	Install in the reverse order	 Check expansion anchors and plastic screws, replace if necessary.