AR83.70-P-5700FAA | Remove/install coolant circulation pump | 7.9.10 |
MODELS 170.444 /449 1# with TRANSMISSION 722.6
Retrofitted Thermo Top C stationary heater
P83.70-3899-06
3 Coolant return hose, heater
4 Coolant feed hose, heater
5 Heater cover
8 Circulation pump coupling
13 Circulation pump bracket
17 Circulation pump attachment
A6 Heater, stationary heater
A6m1 Circulating pump
| Removing, installing | ||
Danger! | Risk of injury to skin and eyes suffering scalding from contact with hot coolant spray. Risk of poisoning from swallowing coolant. | Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage bottles. Wear protective gloves, protective clothing and eye protection. | |
1 | Reduce pressure in coolant circuit | To do this, turn closure cap of coolant expansion tank to notch position 1. | |
2 | Remove and disassemble heater (A6) | Only disassemble until circulation pump (A6m1) can be removed. | |
3 | Unclip heater cover (5) | ||
4 | Disconnect circulation pump coupling (8) | Installation: coupling is coded. | |
5 | Release circulation pump attachment (17) and detach bracket (13) | Installation: attach circulation pump bracket first. | |
6 | Detach circulation pump (A6m1) from coolant hose (4) | Collect escaping coolant and fill back into coolant expansion tank after installation. | |
7 | Install in the reverse order | ||
8 | Bleed coolant circuit following installation of the heater | ||
Checking | |||
Danger! | Risk of explosion due to fuel vapors, risk of poisoning from breathing in combustion gases and risk of injury due to combustions during or after heating operation | Do not operate stationary heater, auxiliary heater or engine with heater booster in closed areas or when refueling. Allow heater unit to cool down after operation and wear protective gloves. | |
7 | Start up stationary heater | ||
| Start up stationary heater | If the heater (A6) switches off automatically before reaching its operating temperature and if it cannot be restarted, there is a fault interlock: | |
Cancel fault interlock | |||
10 | Check cooling system for leaks |
Stationary heater
Documente menționate
- ar2000p1010p Verificaţi sistemul de răcire la etanşeitate
- ar8370p530201e Aerisiţi circuitul agentului de răcire după montarea aparatului de încălzire
- ar8370p530207ca
- ar8370p5302nc
- ar8370p5302nc
- as2000z000101a Pericol de rănire la piele şi ochi prin opărire cu lichid de răcire fierbinte pulverizat afară. Pericol de otrăvire datorită înghiţirii lichid de răcire.
- as8370z000201a Pericol de explozie prin vapori de carburant, pericol de intoxicare prin inhalarea de gaze de ardere şi pericol de rănire prin arsuri în timpul sau după exploatarea instalaţiei de încălzire
- az8370p000804a