Replace bearing of electromagnetic clutch

Tip ar · temă 83.55 · versiune 0104 · 2006-07-26

Valabil pentru: MODEL NMB613.358 /388 with ENGINE 457.944 with CODE (HA4) Konvekta air conditioning with roof heater and timer MODEL NMB671.015 /020 /021 /030 /042 with ENGINE 457.942 with CODE (HKA) Konvekta ACX 602 air conditioning with roof heater MODEL NMB613.455 with ENGINE 446.938 with CODE (HKB) Konvekta ACX 641 SAPTCO air conditioning without roof heater MODEL NMB671.030 with ENGINE 457.942 with CODE (HKC) Sütrak AC 353 air conditioning without roof heater MODEL NMB613.358 /388 with ENGINE 457.944 with COD

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 3 Suprastructură › 83 Climatizare › 83.55 Compresor de refrigerent — Seria 613 (modele 358, 367, 388, 455) · Seria 671 (modele 015, 020, 021, 030, 042)

EinPAS 39 Încălzire/Aerisire/Răcire › 39.15 Climatizare › 39.15.40 Compresor lichid de răcire — Seria 613 (modele 358, 367, 388, 455) · Seria 671 (modele 015, 020, 021, 030, 042)

Valabil și pentru motoare/cutii de viteze: 446 938, 457 942, 457 944

AR83.55-T-7682-02BA

Replace bearing of electromagnetic clutch

Workshop equipment

WE58.40-Z-1001-12A

Stationary workshop press 65 t

Replace bearing of electromagnetic clutch

T83.55-0013-11

1 Remove outer circlip (1).

T83.55-0014-12

2 Detach belt pulley (2) from the clutch using a suitable three-arm puller.

T83.55-0015-11

3 Remove inner circlip (3).

4 Press out bearing using the workshop press.

5 Install new bearing with the aid of a suitable drift.

6 Install inner circlip (3).

7 Fit belt pulley (2) with the aid of a plastic mallet.

8 Install outer circlip (1).