AR83.50-T-5115B | Removing and installing condenser (roof version) blower bridge | 27.2.01 |
MODELS 613.355 /358 /388 /455 /485 with CODE (HA4) Konvekta air conditioning with roof heater and timer
MODELS 613.355 /358 /388 /455 /485
with CODE (HA4) Konvekta air conditioning with roof heater and timer
with CODE (H92) Deletion of roof heater
T83.50-0007-11
1 Condenser blower
2 Condenser blower bridge
3 Condenser
| Remove/install | ||
| Observe accident prevention regulations when working near roof of vehicle. | ||
1 | Switch off ignition | Make sure that the air conditioning is switched off and that the condenser blowers have stopped turning. | |
2 | Remove air conditioning cover (roof equipment) | ||
3 | Disconnect electrical connectors from condenser blower (1) | ||
4 | Cut tie straps from electrical lines and put cable set to one side | Installation: Fit new tie straps. | |
5 | Detach condenser blower bridge (2) from rubber buffers (arrows) | If necessary: Remove condenser blower | |
Remove/install the air conditioning's condenser blower (roof equipment) | |||
6 | Remove condenser blower bridge (2) from condenser (3) | ||
7 | Install in the reverse order |