AR82.70-P-8951TX | Remove/install antenna | 17.3.10 |
MODEL 219.3 up to 31.5.06
with CODE (521) MB Audio 50 radio USA (without navigation)
with CODE (525) MB Audio 50 APS radio
with CODE (526) COMAND (without navigation)
with CODE (527) COMAND APS (with navigation)
with CODE (528) HIGH Class USA
with CODE (529) HIGH Class Japan
with CODE (530) COMAND APS USA (with navigation system)
P82.70-5365-06
Shown on vehicle without code 228 Stationary heater
2 Telephone antenna line
6 Ground cable
7 Ground cable
8 Self-adhesive felt
2a GPS antenna line
A2/49a1x1 Telephone antenna connector
A2/49a2x1 GPS antenna connector
W6 Ground (left wheel well in luggage compartment)
W7 Ground (right wheel well in luggage compartment)
P82.70-5225-06
1 Right cover
2 Telephone antenna line
3 Right grommet
1a Left cover
2a GPS antenna line
3a Left grommet
A2/49 Roof antenna
| Remove/install | ||
| Information on preventing damage to electronic components due to electrostatic discharge | ||
1 | Remove right and left side lining in luggage compartment | ||
2 | Disconnect telephone antenna connector (A2/49a1x1) | ||
3 | Undo nut on ground of right luggage compartment wheel well (W7) and remove ground line (7) | ||
4 | Detach GPS antenna connector (A2/49a2x1) | ||
5 | Undo nut on ground of left luggage compartment wheel well (W6) and remove ground line (6). | ||
6 | Remove trim panel (1) on the right | ||
7 | Remove left cover (1a) | ||
8 | Remove telephone antenna line (2) with right grommet (3) out of the right cable duct | Note installation of lines in luggage compartment. | |
Installation: Coat right grommet (3) with soapy water. Attach telephone antenna line (2) using self-adhesive felt (8) in area of trunk lid hinge. | |||
9 | Pull telephone antenna line (2) out of seal of heated rear window | Installation: Insert telephone antenna line (2) into seal of heated rear window using a suitable feeler gauge. | |
| |||
10 | Remove GPS antenna line (2a) with left grommet (3a) from left cable duct | Note installation of lines in luggage compartment. | |
Installation: Coat left grommet (3a) with soapy water. Attach GPS antenna line (2a) using self-adhesive felt (8) in area of trunk lid hinge. | |||
11 | Pull GPS antenna line (2a) out of seal of heated rear window | Installation: Insert GPS antenna line (2a) into seal of heated rear window using a suitable feeler gauge. | |
| |||
12 | Separate roof antenna (A2/49) from heated rear window using mounting wedge and remove | Installation: Glue on roof antenna (A2/49). | |
| |||
Glass primer | |||
Adhesive foil for roof antenna on rear window (when installing old roof antenna (A2/49)) | |||
13 | Remove adhesive residue from heated rear window | Cleaner | |
14 | Install in the reverse order |
129 589 03 21 00
Feeler gauge
Mounting wedge
110 589 03 59 00
Repair materials
Number | Designation | Order number |
BR00.45-Z-1023-02A | Glass primer | A 006 989 39 71 |
BR00.45-Z-1079-02A | Adhesive foil | A 211 817 00 21 |
BR00.45-Z-1025-04A | Cleaner | A 005 989 19 71 |
Documente menționate
- ah5400p000101a Indicaţii pentru evitarea defectării componentelor electronice prin descărcare electrostatică
- ar6830p4800tx
- ar8270p895101tx