ar8230s6800p

Remove/install wiper motor

Tip ar · temă 82.30 · versiune 0100 · 2017-07-04

Valabil pentru: Model 470, 471

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 3 Suprastructură › 82 Instalaţie electrică, structură › 82.30 Ştergător parbriz — Seria 470 · Seria 471

EinPAS 36 Vizibilitate › 36.30 Ştergere/Spălare › 36.30.50 Instalație de spălat parbrizul — Seria 470 · Seria 471

AR82.30-S-6800P

Remove/install wiper motor

21.06.2017

Model

470, 471

Remove/install wiper motor

1

Ball socket

2

Articulated rod

3

Wiper motor

4

Screws

5

Wiper linkage

S82.30-4571-04

Warning

Injury hazard from pinching and crushing, in extreme cases extremities can even be cut off when caught in windshield wiper mechanism.

When working on the windshield wiper mechanism, always switch off the ignition and store transmitter key outside of transmission range (at least 2 m).

AS82.30-Z-0001-01A

Remove/install

1

Remove windshield wiper system

AR82.30-S-0001P

2

Pry off ball socket (1) of articulated rod (2) on ball head of the wiper motor (3)


Carefully pry off articulated rod (2).
Otherwise the articulated rod (2) will be deformed and thus damaged.

Installation: Apply a thin layer of lubricant on the inside of the ball socket (1).

Molykote BR 2 plus grease

*BR00.45-Z-1081-06A

3

Remove screws (4) and remove wiper motor (3) from wiper linkage (5)

4

Install in the reverse order

Repair materials

Number

Designation

Order number

BR00.45-Z-1081-06A

Molykote BR 2 plus grease

Liqui Moly GmbH
Jerg-Wieland-Strasse 4
D-89081 Ulm-Lehr, Germany
www.liqui-moly.de

Documente menționate