ar8230p6800ff

Remove/install wiper motor

Tip ar · temă 82.30 · versiune 0100 · 2004-01-19

Valabil pentru: MODELS 454.0

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 3 Suprastructură › 82 Instalaţie electrică, structură › 82.30 Ştergător parbriz — Seria 454 (modele 0**)

EinPAS 36 Vizibilitate › 36.30 Ştergere/Spălare › 36.30.50 Instalație de spălat parbrizul — Seria 454 (modele 0**)

AR82.30-P-6800FF

Remove/install wiper motor

13.8.03

MODELS 454.0

Remove/install wiper motor

P82.30-2320-06

1 Wiper linkage

2 Screw

3 Clip

4 Water tank cover

5 Electrical connector

6 Rubber mount

M6/1 Wiper motor

Remove/Install

Danger!

Risk of injury in the form of trapping or crushing, or even severing of limbs, if caught in windshield wiper mechanism

Always remove ignition key when working on windshield wiper mechanism.

AS82.30-Z-0001-01A

1

Remove wiper arms

AR82.30-P-6951FF

2

Remove paneling from center piece in front of windshield

AR88.00-P-2792FF

3

Rotate clips (3) to left and right on water tank cover (4) by 90° and remove

4

Unclip water tank cover (4)

5

Disconnect electrical connector (5) from wiper motor (M6/1).

6

Unscrew bolts (2)

*BA82.30-P-1002-01G

7

Remove wiper linkage (1) with wiper motor (M6/1) from rubber mount (6)

Always replace wiper motor (M6/1) and wiper linkage (1) together.

8

Install in the reverse order

9

Perform function check

Windshield wiper

Number

Designation

Type
454.0

BA82.30-P-1002-01G

Screw, wiper system to body

Nm

8

Documente menționate