Remove/install front overhead control panel

AR82.20-P-1100RT

Remove/install front overhead control panel

3.8.06

26.7.06

Disconnect/connect ground line for battery and carry out basic programming removed

Steps 1 and 7

 

Remove/install



Notes on avoiding damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

1

Unclip front section, covering, rain/light sensor (1) toward the front

 Carefully unclip tabs (5).

2

Unclip rear section, covering, rain/light sensor (2) downward

 Carefully detach rear section, covering, rain/light sensor (2) from line.

3

First unclip overhead control panel control unit (N70) at the front clips (3), then at the rear clips (3) and carefully remove downward

 Treat ribbon cable (4) carefully to prevent damage.

 Long wedge

*115589035900

4

Disconnect electrical connectors from overhead control panel control unit (N70)

5

Install in the reverse order

6

Carry out function check