ar8220d1100ts

Remove/install front overhead control panel

Tip ar · temă 82.20 · versiune 0100 · 2017-12-12

Valabil pentru: Model 907, 910

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 3 Suprastructură › 82 Instalaţie electrică, structură › 82.20 Sistem de iluminare interior — Seria 907 · Seria 910

EinPAS 25 Rețea de bord/Rețea/Multi-funcție › 25.15 Rețea/Multi-funcție › 25.15.18 Comutator/Grup comutatoare/Panou comandă — Seria 907 · Seria 910

AR82.20-D-1100TS

Remove/install front overhead control panel

22.11.2017

Model

907, 910

Remove/install front overhead control panel

D82.20-0081-09

1

Overhead control panel (OCP)

2

Electrical connectors

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Remove/install

1

Switch off ignition and store transmitter key outside of transmission range (min. 2 m)

2

Overhead control panel (1) in rear area (arrow A) and swing downwards

WIS Service Media
wsm://04_ 201710_03
Operation steps 2 to 4 are shown here.

3

Separate electrical connectors (2)

The number of electrical connections (2) may vary depending on vehicle equipment.

4

Unhook overhead control panel (1) from brackets (arrows B) and remove

5

Install in the reverse order

Check

6

Perform function test of overhead control panel (1)

Documente menționate