Remove/install taillamp

AR82.10-S-4905E

Remove/install taillamp

21.12.15

Model

447, 448

Modification notes

9.6.15

Method extended

Operation step 2

Shown on model 447.8

1

Screw

2

Mounting clip

3

Ball head

4

Ball head

5

Mounting clip

6

Electrical connector

E3

Left rear lamp unit

E3/1

Left rear LED lamp unit

E4

Right rear lamp unit

E4/1

Right rear LED lamp unit

 

Remove/install

1

Remove bolts (1)

2

First unclip left rear lamp unit (E3) or left rear LED lamp unit (E3/1) or right rear lamp unit (E4) or right rear LED lamp unit (E4/1) at top from ball head (3) and then at bottom from ball head (4)


Carefully unclip left rear lamp unit (E3) or left rear LED lamp unit (E3/1) or right rear lamp unit (E4) or right rear LED lamp unit (E4/1).
Otherwise there is a risk of breakage of left rear lamp unit (E3) or left rear LED lamp unit (E3/1) or right rear lamp unit (E4) or right rear LED lamp unit (E4/1).

 Installation: Ensure that retaining clips (2, 5) are correctly seated in the associated ball heads (3, 4).

 Clip remover

*452589016300

If the sidewall paneling has already been replaced and the left rear LED lamp unit (E3/1) or the right rear LED lamp unit (E4/1) therefore cannot be unclipped in that manner.



Remove left rear LED lamp unit (E3/1) or right rear LED lamp unit (E4/1)

Model 447, 448
with code LG4 (Taillights, brake lights and turn signal light in LED technology)

AR82.10-S-4905-01E

3

Disconnect electrical connector (6)

4

Install in the reverse order



Check

5

Carry out function check for left rear lamp unit (E3) or left rear LED lamp unit (E3/1) or right rear lamp unit (E4) or right rear LED lamp unit (E4/1)