ar8210p4730lc

Remove/install lamp unit

Tip ar · temă 82.10 · versiune 0101 · 2015-05-29

Valabil pentru: Model 217

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 3 Suprastructură › 82 Instalaţie electrică, structură › 82.10 Sistem de iluminat exterior — Seria 217

EinPAS 30 Instalaţie de iluminat › 30.15 Sistem de iluminare exterior › 30.15.40 Lumină față — Seria 217

AR82.10-P-4730LC

Remove/install lamp unit

18.5.15

Model

217

Remove/install lamp unit

P82.10-7503-09

Shown on right front lamp unit (9)

1

Engine compartment paneling

6

Bolts

2

Engine compartment paneling

7

Screw

3

Engine air intake duct

8

Bolts

4

Coolant line

9

Right front lamp unit

5

Washer fluid reservoir

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Remove/install

1

Remove front bumper

AR88.20-P-2000LC

2

Remove engine compartment paneling (1, 2)

3

Remove engine air intake duct (3)

When removing right front lamp unit (9).

4

Unclip coolant line (4) from washer fluid reservoir (5)

When removing right front lamp unit (9).

5

Remove screws/bolts (6) from washer fluid reservoir (5)

When removing right front lamp unit (9).

6

Press washer fluid reservoir (5) to one side until bolt (7) of right front lamp unit (9) is accessible.

When removing right front lamp unit (9).

7

Remove bolt (7)

8

Remove screw/bolts (8)

9

Remove left front lamp unit or right front lamp unit (9) far enough until the electrical connectors on the left front lamp unit or right front lamp unit (9) are accessible


Carefully remove left front lamp unit or right front lamp unit (9).
Left front lamp unit or right front lamp unit (9) may be damaged by the fender.

10

Disconnect electrical connectors from left front lamp unit or right front lamp unit (9)

11

Remove left front lamp unit or right front lamp unit (9)

12

Remove left front actuation module, LED exterior lighting or right front actuation module, LED exterior lighting

When replacing the left front lamp unit or right front lamp unit (9).

AR82.10-P-4650LF

13

Remove left headlamp control unit and right headlamp control unit

When replacing the left front lamp unit or right front lamp unit (9).

AR82.10-P-4660LF

14

Install in the reverse order

15

Carry out initial startup of left front lamp unit or right front lamp unit (9)

When replacing the left front lamp unit or right front lamp unit (9).

AD00.00-P-2000-04B

Note Data Matrix code on left front lamp unit or right front lamp unit (9).

Check

16

Check headlamp adjustment and correct if necessary

AP82.10-P-8260S

Documente menționate