AR82.10-P-4083A | Removing and installing front axle headlamp range adjustment sensor | 6.4.95 |
MODEL 210 with CODE (612b) Xenon headlamps
P82.10-0311-06
Model 210 except 210.08/28
4 Connecting rod
5 Electrical connector
6 Screws
7 Holder
8 Screws
14 Nut
A52 Front axle headlamp range adjustment sensor
P82.10-0564-06
Location on models 210.08/28
A52 Front axle headlamp range adjustment sensor
| Removal, installation | ||
1.1 | Remove bottom engine compartment paneling | Vehicles with gasoline engines | |
1.2 | Remove bottom section of sound-proofing capsule | Vehicles with diesel engines | |
2.1 | Remove front inner fender in front fender (right side) | Models 210.08/28 The front axle sensor is located on the outside of the longitudinal member. | |
3 | Remove connecting rod (4) | ||
4 | Disconnect electrical connector (5) | ||
5 | Unscrew screws (6) | ||
6 | Remove front axle headlamp range adjustment sensor (A52) and unscrew holder (7) | After replacing the front axle sensor for the headlamp range adjustment program zero position with HHT | |
7 | Reinstall in opposite order |