ar8210p0004tx

Remove/install front axle level sensors

Tip ar · temă 82.10 · versiune 0100 · 2005-05-20

Valabil pentru: MODELS 219.3 with CODE (615) Bi-xenon headlamp unit with integrated curve illumination

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 3 Suprastructură › 82 Instalaţie electrică, structură › 82.10 Sistem de iluminat exterior — Seria 219 (modele 3**)

EinPAS 30 Instalaţie de iluminat › 30.15 Sistem de iluminare exterior › 30.15.12 Senzor/Comutator/Cablaj — Seria 219 (modele 3**)

AR82.10-P-0004TX

Remove/install front axle level sensors

23.12.04

MODELS 219.3 with CODE (615) Bi-xenon headlamp unit with integrated curve illumination

Remove/install front axle level sensors

P82.10-4034-07

1 Nut

2 Pin

3 Nut

B22/2 Front axle level sensor

4 Electrical connector

5 Bracket

6 Bolts

Remove/Install

1

Raise vehicle with lifting platform

AR00.60-P-1000TX

2

Counterhold pin (2) and unscrew nut (1)

Replace self-locking nut (1).

3

Unscrew nut (3) and concealed nut (arrow)

Replace self-locking nut (3) and self-locking concealed nut (arrow).

4

Disconnect electrical connector (4) and remove front axle level sensor (B22/2)

5.1

Unscrew bolts (6) and remove
bracket (5)

Only when replacing the front axle level sensor (B22/2).

Replace self-locking bolts (6).

6

Install in the reverse order

7

Check the adjustment of the left front lamp unit and the right front lamp unit, correct if necessary.

Check and correct headlamp setting

AP82.10-P-8260TX

Documente menționate