ar8030p4515f

Removing and installing transponder coil

Tip ar · temă 80.30 · versiune 0103 · 1997-03-27

Valabil pentru: MODEL 202 as of 1.8.96 up to 31.5.97 MODEL 202.083 up to 31.5.97 MODEL 210 as of 1.6.96 up to 28.2.97 MODEL 210.072 up to 28.2.97 with CODE (491) USA version MODEL 210.2 up to 28.2.97

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 3 Suprastructură › 80 Închidere centralizată, comandă confort, sisteme de autorizare a pornirii › 80.30 Telecomandă cu IR — Seria 202 · Seria 210

EinPAS 29 Sistem autorizare pornire/Sistem de siguranță › 29.25 Autorizare de pornire › 29.25.14 Emiţător/receptor — Seria 202 · Seria 210

AR80.30-P-4515F

Removing and installing transponder coil

9.1.96

MODEL 202 as of 1.8.96 up to 31.5.97

MODEL 202.083 up to 31.5.97

MODEL 210 as of 1.6.96 up to 28.2.97

MODEL 210.072 up to 28.2.97 with CODE (491) USA version

MODEL 210.2 up to 28.2.97

Removing and installing transponder coil
Removing and installing transponder coil

P80.30-0300-01

P80.30-0301-01

1 2-pin CAN connector

2 2-pin connector for transponder coil
3 18-pin connector
4 Base plate
5 Long wedge
6 Steering wheel lock cover sleeve
L11 Transponder coil
N54/1 IR DAS control module

Removal, installation

1

Remove instrument cluster

AR54.30-P-6015EA

2

Disconnect 2-pin connector for transponder coil (2) from IR DAS control module (N54/1)

3

Press transponder coil (L11) off of steering lock cover sleeve (6) with long wedge (5)

*115589035900

Press long wedge (5) directly between steering lock cover sleeve (6) and transponder coil (L11)

4

Reinstall in opposite order

Removing and installing transponder coil

115 589 03 59 00

Long wedge

Documente menționate