Remove/install side roof cutout trim on pop-up roof

AR77.70-S-0022E

Remove/install side roof cutout trim on pop-up roof

04.11.2015

Model

447.7/8

with code ZK9 (Lifting roof hatch)

Model

447.8

with code ZK0 (EASY UP pop-up roof, electric)

Shown on left side of vehicle on model 447.8 with code ZK7 (MARCO POLO equipment line)

1

Side roof cutout paneling

3

Mounting clip

2

Side headliner

Shown on right side of vehicle on model 447.7 with code ZH6 (Marco Polo ACTIVITY)

1

Side roof cutout paneling

5

Guide

4

Front foot cutout paneling

6

Rear roof cutout paneling

 Danger !

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A



Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S



Remove

1

Open pop-up roof

Model 447.7/8
with code ZK9 (Lifting roof hatch)

AR77.70-S-0001-01E

Model 447.8
with code ZK0 (EASY UP pop-up roof, electric)

AR77.75-S-0001-03E

2

Fold up roof bed and fix in place

3.1

Unclip retaining clips (3) one after the other and remove side roof cutout paneling (1) in direction of center of vehicle

Model 447.8 with code ZK7 (MARCO POLO equipment line)


Carefully unclip retaining clips (3).
Ensure that roof cutout paneling (1) and side headliner (2) are not damaged.

 Clip remover

*452589016300

3.2

Loosen side roof cutout paneling (1) first at front roof cutout paneling (4) one after the other, unclip retaining clips (3) one after the other remove side roof cutout paneling (1) from rear roof cutout paneling (6)

Model 447.7 with code ZH6 (Marco Polo ACTIVITY)


Carefully unclip retaining clips (3).
Ensure that the side roof cutout paneling (1) and rear roof cutout paneling (6) are not damaged.

 Clip remover

*452589016300



Install

4.1

Install side roof cutout paneling (1)

Model 447.8 with code ZK7 (MARCO POLO equipment line)

4.2

First push side roof cutout paneling (1) below guide (5) on rear roof cutout paneling (6), then position below front roof cutout paneling (4) and install

Model 447.7 with code ZH6 (Marco Polo ACTIVITY)

5

Fold down roof bed

6

Close pop-up roof

Model 447.7/8
with code ZK9 (Lifting roof hatch)

AR77.70-S-0001-01E

Model 447.8
with code ZK0 (EASY UP pop-up roof, electric)

AR77.75-S-0001-03E