AR77.20-P-1000-02EA | Installing tilting/sliding roof panel | Electrically operated steel tilting/sliding roof (code 412b) |
Test and adjustment values for tilting/sliding roof
Number | Designation | Model 202 | ||
BE77.20-P-1001-01A | Joint gap | Front of tilting/sliding roof panel | mm | 0,15 |
Side and rear of tilting/sliding roof panel | mm | 0,30 | ||
Special tools
140 589 04 21 00
124 589 00 37 00
Installation pliers
Adjustment gauge (2 each)
P77.20-0012-01
1 Insert adjustment gauge (7) into holder (8) and arrest in direction of arrow.
Note
The adjustment gauge (7) ensures that the holder (8) and tilting/sliding roof panel (1) are positioned properly when installed.
P77.20-0011-01
2 Position tilting/sliding roof panel (1), loosely screw on nuts (3) and screw (4).
P77.20-0013-01
3 Slightly tension tilting/sliding roof panel (1) with installation pliers (9), tighten nuts (3) and screw (4).
4 Remove adjustment gauge (7) and installation pliers (9).
5 Check tilting/sliding roof for proper function.
6 Check joint gaps around closed tilting/sliding roof panel (1) from outside.