ar7720p100001eb

Removing tilting/sliding roof panel

Tip ar · temă 77.20 · versiune 0101 · 2001-10-22

Valabil pentru: MODEL 202 with CODE (414a) Glass electric tilting/sliding roof

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 3 Suprastructură › 77 Tavan culisant, soft top, echipamente suplimentare › 77.20 Trapă culisantă acţionată electric — Seria 202

EinPAS 38 Sistem acoperiş › 38.15 Trapă culisantă/Trapă panoramică culisantă › 38.15.33 Capitonaj/capac acoperiș culisant — Seria 202

AR77.20-P-1000-01EB

Removing tilting/sliding roof panel

Electrically operated glass tilting/sliding roof (code 414a)

Removing tilting/sliding roof panel

P77.20-0014-01

1 Move tilting/sliding roof panel (2) to tilted position.

2 Remove molding (5).

Note
Before pulling off molding press off on outside with plastic wedge.

Removing tilting/sliding roof panel

P77.20-0015-01

3 Unhook rubber bellows (6) on tilting/sliding roof panel (2), unhook rail from slider (arrow) and pull off of holder (8).

Illustrated without tilting/sliding roof panel

Removing tilting/sliding roof panel

P77.20-0016-01

4 Screw off nuts (3).

5 Pry out tilting/sliding roof panel (2).

6 Actuate sliding roof switch in closing direction until sliding roof drive switches off.