Remove/install outer door handle on sliding door

AR72.16-S-2220E

Remove/install outer door handle on sliding door

13.12.2016

Model

447, 448

Modification notes

14.11.2016

Number of turns of adjustment screw, added

Operation Step 3

1

Grommet

3

Door lock cylinder

5

Seal

2

Adjustment screw

4

Door handle

2

Adjustment screw

7

Locking rod

6

Outer door handle bracket

8

Eccentric disk

 

Remove/install

1.1

Remove fuse 74 on left electric sliding door

Model 447.7/8, 448.8
with code T56 (Electric operation of sliding door on left)
If door handle (4) is being removed on left electric sliding door.



Assignment of right footwell firewall fuse and relay module

GF54.15-S-1256-39TRA

1.2

Remove fuse 311 on right electric sliding door

Model 447.7/8, 448.8
with code T55 (Electric operation of sliding door on right)
If door handle (4) is being removed on right electric sliding door.



Assignment of fuse and relay module, right A-pillar

GF54.15-S-1256-38TRA

2

Remove grommet (1)

3

Pull out door handle (4) in direction of arrow (arrow A) and loosen adjustment screw (2) approx. 4 to 5 turns

 When loosening the adjustment screw (2), the locking rod (7) is moved in direction of arrow (arrow D) and the eccentric bolt (8) is turned approx. 25° in direction of arrow (arrow E). This releases the door lock cylinder (3) allowing it to be removed.

 Installation: Tighten adjustment screw (2) until a perceptible resistance on the tool can be felt.

4

Remove door lock cylinder (3)

5

Pull door handle (4) toward rear out of outer door handle bracket (6) in direction of arrow (arrow B) and remove in direction of arrow (arrow C)

6

Remove seal (5)

 Installation: Check seal (5) for damage.

If seal (5) is damaged.



Install new seal (5).

7

Install in the reverse order



Check

8

Check door handle (4) for proper function