P72.10-0025-06
1 Handle
2 Lock guide cylinder
3 Rotary rod
4 Washer
5 Washer
6 Allen head bolt, 4 mm
7 Retaining bracket for bolt 6
8 Bearing bracket
9 Bolts
P72.10-0026-01
P72.10-0024-01
2 Lock guide cylinder
3 Rotary rod
10 Eccentric adjustment bolt
11 Door lock
12 Actuating lever
13 Eccentric adjustment bolt opening
14 Allen head bolt opening
| Removing | ||
1 | Pull door frame seal out of channel in area of door lock | ||
2 | Loosen 4 mm Allen head bolt (6) | Allen head bolt (6), accessible through insert bead at front of door, is secured against falling by the bracket (7) | |
3 | First pull out guide (2) toward rear and toward outside | ||
4 | Pull handle (1) with base (4) toward rear out of bearing bracket (8) and remove | Handle and guide on Elegance with chrome-plated insert. Chrome work not available individually. Bearing bracket (8) can be removed through assembly opening in inner door panel. | |
5 | Remove base (5) | ||
| Install | ||
6 | Install base (5) | Bearing bracket (8) installed | |
7 | Move eccentric adjustment bolt (10) toward outside | Facilitates door assembly | |
8 | Install handle (1) with base (4) in bearing bracket (8) and simultaneously install in operating lever (12) on door lock | ||
9 | Insert guide (2) | Guide rotary rod (3) into door lock actuation | |
10 | Screw in 4 mm Allen head bolt (6) and tighten | | |
11 | Adjust play between handle (1) and operating lever (12) with eccentric adjustment screw (10) | Access through opening (13) on front of door Use Phillips screwdriver | |
12 | Check play by pulling handle (1) until resistance can be felt | ||
13 | Install door frame seal | ||
14 | Carry out function check |
Test and adjustment values for front door
Front door