P72.10-2049-06
1 Door liner
2 Door recess handle
3 Cover
(with code 292 front side airbag)
4 Screw
(with code 292 front side airbag)
5 Round lock cover
6 Cover
7 Screw
8 Window crank
9 Clip
P72.10-2039-01
10 Screw
11 Retainer
12 Linkage
P72.10-2040-01
P72.10-0003-01
P72.10-0004-01
Modification notes
| Removal, installation | ||
1 | Open crank window | ||
2 | Remove window crank (8) | ||
3 | Press off door handle recess (2) with installation wedge. | | |
4 | Unclip cover (3) and unscrew screw (4) | With code 292 (front side airbag) | |
5 | Unscrew screw on round lock cover (5) and remove round lock cover downwards | ||
6 | Press cover (6) off below door pocket and unscrew screw (7). | ||
7 | Unscrew screw (10) in area of inside door opener. | ||
8 | Press door liner (1) off of inner door panel at bottom, front and rear using installation wedge | Insert installation wedge directly next to each clip (9). | |
9 | Pry top of the door liner (1) upwards out of the clips at the sealing rail using installation wedge and at the same time pull away from the inner door panel. | | |
10 | Open retainer (11) on linkage (12) and unhook linkage (12). | Inside door opener with control cable on electrically adjustable driver's seat | |
11 | Disconnect electrical connections on door liner | ||
12 | Put down door liner (1) | ||
13 | Check foil and clips on inner door panel and replace if necessary | Rivet on mount for armrest locking lug after installing foil. When replacing foil cut out this area and glue with overlap or seal with adhesive tape. | |
14 | Check clips (9) on door liner (1) and replace if necessary | ||
15 | Reinstall in reverse order |
Special tool
110 589 03 59 00
Installation wedge
Repair materials
Number | Designation | Order number |
BR00.45-Z-1004-02A | Adhesive PVC 914 | A 001 989 30 71 |