ar6830s470002e

Remove/install lower B-pillar paneling

Tip ar · temă 68.30 · versiune 0103 · 2015-11-06

Valabil pentru: Model 447, 448

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 3 Suprastructură › 68 Echipament interior › 68.30 Capitonaje, ramă ornament — Seria 447 · Seria 448

EinPAS 37 Echipament interior › 37.45 Capitonaj › 37.45.30 Capitonaj habitaclu/Habitaclu — Seria 447 · Seria 448

AR68.30-S-4700-02E

Remove/install lower B-pillar paneling

Model

447, 448

Remove/install lower B-pillar paneling

110 589 03 59 00

Mounting wedge

Remove/install lower B-pillar paneling

S68.30-4719-09

Shown on model 447.8 on right side of vehicle

1

Detach lower B-pillar paneling (2) in area of arrows (A) with assembly wedge.

2

Detach lower B-pillar paneling (2) in area of arrows (B) with assembly wedge.

3.1

Model 447.6/7
Model 447.8
except code ZK7 (Equipment line MARCO POLO)
Model 448
Remove lower B-pillar paneling (2) upward.

3.2

Model 447.8
with code ZK7 (Equipment line MARCO POLO)
Remove lower B-pillar paneling (2) upward until electrical connector on interior temperature display temperature sensor (B14/1) is accessible.

4

Model 447.8
with code ZK7 (Equipment line MARCO POLO)
Disconnect electrical connector from interior temperature display temperature sensor (B14/1) and remove lower B-pillar paneling (2).

5

Model 447.8
with code ZK7 (Equipment line MARCO POLO)
Unclip interior temperature display temperature sensor (B14/1) from lower B-pillar paneling (2).

When replacing lower B-pillar paneling (2).

6

Install in the reverse order.