ar6830s4101p

Remove/install front door sill

Tip ar · temă 68.30 · versiune 0100 · 2017-06-01

Valabil pentru: Model 470, 471

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 3 Suprastructură › 68 Echipament interior › 68.30 Capitonaje, ramă ornament — Seria 470 · Seria 471

EinPAS 37 Echipament interior › 37.45 Capitonaj › 37.45.37 Capitonaj spațiu pedalier — Seria 470 · Seria 471

AR68.30-S-4101P

Remove/install front door sill

17.05.2017

Model

470, 471

Remove/install front door sill

S68.30-4745-07

Shown on right side of vehicle

1

Front door sill

3

Mounting clip

2

Frame seal

4

Clip

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Remove/install

1

Unclip the front door sill (1), starting from the rear (arrow A).

Installation: Make sure that the front door sill (1) is properly fitted on the sealing frame (2).

Long wedge

*115589035900

2

Unclip the front door sill (1) at the front (arrow B) and remove.

Installation: Make sure that the front door sill (1) is properly fitted on the sealing frame (2).

Long wedge

*115589035900

3

Check the retaining clip (3) and clip (4) for damage and to ensure that they are properly fitted.

If the retaining clip (3) / clip (4) is damaged.

Replace the retaining clip (3) / clip (4).

If the retaining clip (3) / clip (4) is not properly fitted in the supports on the front door sill (1).

Position the retaining clip (3) / clip (4) correctly.

4

Install in the reverse order

Remove/install front door sill

115 589 03 59 00

Long wedge

Documente menționate