P68.30-2765-09
1 Trunk floor paneling
2 Lower rear center section paneling
3 Spreading clips
4 Clips
5 Ski bag rear wall paneling
6 Cross member paneling
7 Left soft top paneling
14 Separation centering bracket
15 Left base bracket
16 Right base bracket
17 Bolts
18 Ski bag
19 Plastic nuts
8 Right soft top compartment paneling
9 Left side wall paneling
10 Right side wall paneling
11 Threaded clips
12 Trunk lighting
13 Bolts
| Remove/Install | ||
1 | Open trunk lid | ||
2 | Remove trunk floor paneling (1) | ||
3 | Remove spreading clip (3) and clip (4) from bottom rear center section paneling (2) | ||
4 | Remove bottom rear center section paneling (2) | ||
5 | Unclip clip (4) from left side wall paneling (8) | Assembly wedge | |
6 | Unclip threaded clip (11) from left side wall paneling (9) | ||
7 | Remove left side wall paneling (8), disconnect connector for trunk illumination (12) | ||
8 | Unclip clip (4) from right side wall paneling (8) | ||
9 | Unclip threaded clip (11) from right side wall paneling (10) | ||
10 | Remove right side wall paneling (10) | ||
11 | Unclip clip (4) from cross member paneling (6) | First unclip clip (4) at side of trunk because the soft top compartment is still open | |
12 | Open soft top compartment cover | ||
13 | Cover vehicle in rear area | To prevent scratching the paint during assembly work. | |
14 | Remove retractable trunk partition | ||
15 | Unscrew bolts (13) from separation centering bracket (14) | ||
16 | Remove separation centering bracket (14) | ||
17 | Unclip clip (4) from cross member paneling (6) | ||
18 | Remove cross member paneling (6) | ||
19 | Unscrew plastic nuts (19) | ||
20 | Remove left base bracket (15) | ||
21 | Unscrew threaded clip (11) from left soft top compartment paneling | ||
22 | Unclip clip (4) from left soft top compartment paneling (7) | ||
23 | Remove left soft top compartment paneling (7) | ||
24 | Unscrew plastic nuts (19) | ||
25 | Remove right base bracket (16) | ||
26 | Unscrew threaded clip (11) from right soft top compartment paneling | ||
27 | Unclip clip (4) from right soft top compartment paneling (8) | ||
28 | Remove right soft top compartment paneling (8) | ||
29 | Open ski bag (18) and unscrew bolts (17) | ||
30 | Remove ski bag (18) | ||
31 | Unclip clip (4) from ski bag rear wall paneling (5) | ||
32 | Remove ski bag rear wall paneling (5) | ||
33 | Install in the reverse order |
Assembly wedge
110 589 03 59 00