ar6830p4490sxs

Remove/install trim at C-pillar

Tip ar · temă 68.30 · versiune 0100 · 2006-10-23

Valabil pentru: MODEL 221.1 with CODE (Z07) Top protection

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 3 Suprastructură › 68 Echipament interior › 68.30 Capitonaje, ramă ornament — Seria 221 (modele 1**)

EinPAS 37 Echipament interior › 37.45 Capitonaj › 37.45.30 Capitonaj habitaclu/Habitaclu — Seria 221 (modele 1**)

AR68.30-P-4490SXS

Remove/install trim at C-pillar

19.9.06

MODEL 221.1 with CODE (Z07) Top protection

Remove/install trim at C-pillar

P68.30-3284-09

1 Roller blind rail

2 Upper C-pillar trim

3 Cover

4 Lower C-pillar trim

9 Bolt

10 Belt end fitting

11 Seat belt

12 Bolt

5 Edge guard

6 Nut

7 Nut

8 Clip

Remove/install

Notes on avoiding damage to windows installed in special protection vehicles

AH67.00-P-0003-01FB

1

Fold down rear head restraints

2

Loosen edge guard (5) in area of upper C-pillar trim (2) and lower C-pillar trim (4).

3

Unclip and remove roller blind rail (1) from upper C-pillar trim (2).

4

Unclip cover (3) from upper C-pillar trim (2) and remove nut (6)

5

Remove bolts (9) on paneling on upper C-pillar (2)

6

Unclip and remove upper C-pillar trim (2)

7

Unclip clip (8) at lower C-pillar trim (4)

8

Remove nut (7) at lower C-pillar trim (4)

9

Remove rear seat cushion

AR91.12-P-1020SXS

10

Remove bolt (12) at belt end fitting (10)

*BA91.40-P-1001-01O

11

Remove lower C-pillar trim (4) while at the same time guiding seat belt (11) through it

Installation: Do not twist seat belt (11).

12

Install in the reverse order

Seat belts/emergency tensioning retractors

Number

Designation

Model 221

BA91.40-P-1001-01O

Bolt at belt end fitting

Nm

32

Documente menționate