Remove/install trim at C-pillar

AR68.30-P-4490CW

Remove/install trim at C-pillar

20.8.07



Removing

1

Remove edge guard (2) in area of C-pillar paneling (1) and upper area of paneling (3).

2

Unclip clamp (4).



*110589035900

3

Remove rear seat cushion

AR91.12-P-1020CW

4

Remove belt end fitting (5)

5

Unclip C-pillar paneling (1) from clip (6) and pull toward front; slightly pivot in direction of center of vehicle and remove toward front from C-pillar.

 Carefully remove C-pillar paneling (1). Danger of damaging headliner (7).

 Clip (6) remains on C-pillar paneling (1).



*110589035900

6

Pull seat belt (8) through passage out of C-pillar paneling (1).



Install

7

Install sheet metal nut (9), which stuck in C-pillar mount during removal, in C-pillar paneling (1).

8

Pull seat belt (8) through passage in C-pillar paneling (1)

 Do not twist seat belt (8).

9

Position C-pillar paneling (1) in openings (arrows) in rear shelf (10) and body.

 Thereby hold C-pillar paneling (1) pivoted slightly in direction of center of vehicle.

10

Clip C-pillar paneling (1) to C-pillar.

 Observe transition to headliner (7).

11

Install belt end fitting (5)

 Do not install seat belt (8) when twisted



*BA91.40-P-1006-01P

12

Install rear seat cushion

AR91.12-P-1020CW

13

Clip in clamp (4).

14

Fasten edge guard (2).

Number

Designation

Type
204.0

BA91.40-P-1006-01P

Bolt at rear belt end fitting

Nm

32