Remove/install center cover on instrument panel

AR68.10-D-0001TS

Remove/install center cover on instrument panel

15.03.2018

Model

907, 910

Shown on model 907 with code EE1 (230 V socket) and with code V85 (Smoker Package)

1

Cover

2

Bolts

Shown on model 907 with code EE1 (230 V socket) and with code V85 (Smoker Package)

1

Cover

3

Electrical connector

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

 

Remove/install

1

Detach ground line of on-board electrical system battery.

Model 907, 910
with code EE1 (230 V socket)
Model 907.1/6/7
with code EE3 (115 V socket)

AR54.10-D-0029TS

2

Remove operating unit for climate control.

AR83.40-D-6348TS

3

Remove lower center stowage compartment at instrument panel.

AR68.10-D-1513TS

4

Release lower trim for instrument panel on driver's side in area of trim (1).

AR68.10-D-1501TS

5.1

Remove stowage compartment in instrument panel lower section on front passenger side.

Model 907, 910
with code FJ4 (Stowage compartment under cockpit)

AR68.10-D-1610TS

5.2

Remove lower trim for instrument panel on front passenger side.

Model 907, 910
except code FJ4 (Stowage compartment under cockpit)

AR68.10-D-1502TSF

6

Remove lower trim for center instrument panel.

Model 907

AR68.10-D-1498TSR

Model 910

AR68.10-D-1498TSF

7

Unscrew bolts (2).

8

Unclip trim (1) in upper area.

 Clip remover

*452589016300

9

Remove trim (1) until electrical connectors (3) are accessible.

10

Disconnect electrical connectors (3) and remove trim (1).

 The number of electrical connectors (3) may vary depending on the vehicle equipment involved.

11

Install in the reverse order.



Check

12

Perform function test of all components installed in trim (1).