ar6720p200002d

Cutting out rear window with cutter

Tip ar · temă 67.20 · versiune 0100 · 2006-07-26

Valabil pentru: MODEL 140.02 /03 /04 /05 /13

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 3 Suprastructură › 67 Geamuri şi fereastră › 67.20 Geam perete spate, lunetă — Seria 140 (modele 02*, 03*, 04*, 05*, 13*)

EinPAS 36 Vizibilitate › 36.15 Geam din sticlă/Geam › 36.15.42 Lunetă — Seria 140 (modele 02*, 03*, 04*, 05*, 13*)

AR67.20-P-2000-02D

Cutting out rear window with cutter

Danger!

Risk of injury from knife slipping off when clamping it in the multicutter and from glass splinters when cutting out bonded windows

Clamp/unclamp blade only with air supply shut-off. Wear protective gloves and goggles

AS67.00-Z-0001-01A

Cutting out rear window with cutter

Cutting blade

124 589 40 63 00

Commercially available tools

Number

Designation

WH58.30-Z-1003-20A

Multicutter

Cutting out rear window with cutter

P67.20-0277-01

1 Clamp blade (124 589 40 63 00) into multi-cutter (3) .

2 Moisten whetstone and sharpen blade on both sides with machine switched on.

3 Cut out window in area "A" from outside.

4 Clamp blade (for area "B") into multicutter (3).

5 Cut out window in area "B" from outside.

If it is not possible to cut all the way through the glue with the blades available use cutting wire.

Documente menționate