1 | Front roof frame |
2 | Sun visor mount |
W65.20-1051-06
Danger | Risk of explosion caused by paint vapors igniting. Risk of poisoning caused by inhaling paint vapors. | No smoking! No open fire! Use respiratory protection, protective clothing, gloves, safety glasses and protective skin cream. Ensure that the area is well ventilated. | |
Danger | Risk of explosion and poisoning caused by solvent vapors and gasses. Risk of injury to skin and eyes when working with anticorrosion agents | Never spray corrosion protection on flames or hot, glowing objects and keep them well away from all potential sources of ignition. Use them only in well-ventilated rooms; wear respiratory protection. | |
Danger | Risk of death caused by falling from vehicle roof. Risk of injury to other persons caused by falling objects during work in roof area. | ||
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
Danger | The high voltage used for electric welding presents a lethal hazard. Risk of explosion from welding in areas close to highly inflammable materials. Risk of injury from weld splatter and UV-light when welding. Risk of poisoning from inhaling welding gases | Use insulating mats. Wear protective clothing, safety glasses and a protective mask. Remove highly inflammable materials from the hazard area. Use air extraction system. | |
Topical note | Notes on paintwork repairs | ||
Topical note | Notes on cavity preservation | ||
Topical note | General information on body repair | ||
Topical note | Measures for preventing damage to vehicles or components when performing electric welding work | ||
General notes on welding | |||
| Remove | ||
1 | Remove roof paneling front section. | ||
2 | Separate front roof frame (1). | ||
Separate front roof frame (1) with bracket for sun visor (2). | |||
3 | Prepare connecting points on A-pillars for installation. | ||
Commercially available tools | |||
Zinc dust paint suitable for spot welding | |||
4 | Prepare front roof frame(1) for installation. | ||
Commercially available tools | |||
Zinc dust paint suitable for spot welding | |||
| Install | ||
5 | Install front roof frame(1). | ||
Commercially available tools | |||
6 | Install roof paneling front section. |
Documente menționate
- ah0000n000501a Măsuri pentru evitarea deteriorării vehiculelor sau a componentelor în timpul lucrărilor de sudură electrică
- ah6000n000101a Indicaţii generale privind reparaţiile de caroserie
- ah6000n000501a Indicaţii generale pentru sudare
- ah9720p000101b Indicaţii pentru conservarea cavităţilor
- ah9800p940802a Indicaţii pentru vopsirea după reparaţie
- ar6510w5750na
- ar6520w100602na
- ar6520w100603na
- ar6520w100604na
- ar6520w100605na
- as0000z000701a Pericol de moarte datorită tensiunii înalte la sudura electrică. Pericol de explozie prin sudare în zona materialelor uşor inflamabile. Pericol de rănire prin stropi de sudură şi raze UV în timpul sudării. Pericol de intoxicare p
- as0000z001701a Pericol de rănire prin tăieturi respectiv zgârieturi provocate de componentele cu muchii ascuţite ale autovehiculului
- as6500z000201a Pericol de moarte prin cădere de pe acoperişul autovehiculului. Pericol de rănire a altor persoane prin căderea de obiecte în cadrul lucrărilor la acoperiş
- as9700z000101a Pericol de explozie şi pericol de otrăvire prin vapori de diluanţi şi gaze. Pericol de rănire a ochilor şi pielii la prelucrarea agenţilor anticoroziune
- as9800z000201a Pericol de explozie prin aprinderea vaporilor de vopsea. Pericol de otrăvire prin inhalarea vaporilor de vopsea