ar6410s574602p

Prepare rear wall for installation

Tip ar · temă 64.10 · versiune 0100 · 2017-07-19

Valabil pentru: Model 470, 471

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 3 Suprastructură › 64 Perete spate şi hayon › 64.10 Perete spate — Seria 470 · Seria 471

EinPAS 35 Caroserie/Şasiu/Piese detaşabile › 35.31 Perete spate/hayon › 35.31.30 Perete spate/Hayon — Seria 470 · Seria 471

AR64.10-S-5746-02P

Prepare rear wall for installation

Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Model

470, 471

Prepare rear wall for installation

S64.10-4505-09

1

Punch holes for MAG welding in rear panel (1) (area A).

Commercially available devices/tools
Hole punching pliers

2

Drill holes for MAG welding in rear panel (1) (areas B and C).

Commercially available devices/tools
Hand drill

3

Drill holes for MAG welding in rear panel (1) through 2 panel thicknesses (areas D and E).

Commercially available devices/tools
Hand drill

4

Grind mating surfaces on rear panel (1) down to bare metal in cross-hatched areas and around the holes (areas A, B, C, D and E).

Commercially available devices/tools
Rotary wire brush

5

Remove shavings, drilling chips and punching residues.

Commercially available devices/tools
Wet and dry vacuum cleaner

Documente menționate