ar6030s0039p

Remove/install seal for pop-out window on hardtop on front passenger side

Tip ar · temă 60.30 · versiune 0100 · 2018-08-29

Valabil pentru: Model 470 with code Y1D (Hardtop) Model 470 with code Y1E (Hardtop with roof railing)

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 3 Suprastructură › 60 Structură generalităţi › 60.30 Platformă — Seria 470

EinPAS 36 Vizibilitate › 36.15 Geam din sticlă/Geam › 36.15.45 Geam culisant/Geam rabatabil/Geam pivotant — Seria 470

AR60.30-S-0039P

Remove/install seal for pop-out window on hardtop on front passenger side

14.08.2018

Model

470

with code Y1D (Hardtop)

Model

470

with code Y1E (Hardtop with roof railing)

Remove/install seal for pop-out window on hardtop on front passenger side

S60.30-0330-08

1

Hardtop pop-out window

2

Seal

Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Remove/install

1

Remove the hardtop pop-out window (1) on the front passenger side.

AR67.30-S-0012P

2

Pull off seal (2).

Installation: Ensure that the seal (2) is seated correctly. Check seal (2) for wear and damage.

In the case of a corresponding finding,

Install a new seal (2).

3

Install in the reverse order.

Documente menționate