ar5465s0027p

Remove/install rear PARKTRONIC sensor

Tip ar · temă 54.65 · versiune 0101 · 2020-06-16

Valabil pentru: Model 470, 471 with code EZ8 (PARKTRONIC Park Assist)

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 2 Sistem de rulare › 54 Instalaţie electrică, echipament şi instrumente › 54.65 Asistenţă parcare — Seria 470 · Seria 471

EinPAS 28 Sistem confort/Sistem de asistenţă şofer › 28.15 Asistent parcare › 28.15.12 Senzor/Comutator/Cablaj — Seria 470 · Seria 471

AR54.65-S-0027P

Remove/install rear PARKTRONIC sensor

16.06.2020

Model

470, 471

with code EZ8 (PARKTRONIC Park Assist)

Remove/install rear PARKTRONIC sensor

S54.65-4696-08

Shown on left outer PARKTRONIC sensor (2) on model 470

1

Electrical connector

3

Bracket

4

Seal

2

PARKTRONIC sensor

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Remove/install

1

Disconnect electrical connector (1)

2

Release catch hook in direction of arrow and pull PARKTRONIC sensor (2) forwards out of the holder (3)

3

Check seal (4) for signs of damage and correct seating

If seal (4) is damaged.

Install new seal (4).

If the seal (4) is not correctly seated on the PARKTRONIC sensor (2).

Correctly position seal (4).

4

Install in the reverse order

Check

5

Perform function check for PARKTRONIC

Documente menționate