Remove/install sensors for the Parktronic system (PTS) on inside of front bumper
Tip ar · temă 54.65 · versiune 0102 · 2015-12-15
Valabil pentru: Model 447, 448 with code EZ7 (Active Parking Assist)
Nu este disponibil în „ro”; afișat în Engleză.
Încadrare
Grupă funcțională 2 Sistem de rulare › 54 Instalaţie electrică, echipament şi instrumente › 54.65 Asistenţă parcare — Seria 447 · Seria 448
EinPAS 28 Sistem confort/Sistem de asistenţă şofer › 28.15 Asistent parcare › 28.15.12 Senzor/Comutator/Cablaj — Seria 447 · Seria 448
AR54.65-S-0001-03E
Remove/install sensors for the Parktronic system (PTS) on inside of front bumper
Model
447, 448
with code EZ7 (Active Parking Assist)
1
Disconnect electrical connection at PARKTRONIC sensor, inner left front (B8/16) or PARKTRONIC sensor, inner right front (B8/19).
2
Carefully press catch hooks (arrows) outwards and pull Parktronic sensor, inner left front (B8/16) or Parktronic sensor, inner right front (B8/19) out of the guide.
Installation: Check decoupling ring (1) for damage. Transfer decoupling ring (1) when replacing left front inner PARKTRONIC sensor (B8/16) or right front inner PARKTRONIC sensor (B8/19).
