ar5465s000102e

Remove/install sensors for center Parktronic system (PTS) in front bumper

Tip ar · temă 54.65 · versiune 0104 · 2018-10-29

Valabil pentru: Model 447.6/7, 448.7 with code EZ7 (Active Parking Assist) Model 447.8, 448.8 with code EZ7 (Active Parking Assist) except code PS2 (AMG line)

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 2 Sistem de rulare › 54 Instalaţie electrică, echipament şi instrumente › 54.65 Asistenţă parcare — Seria 447 (modele 6**, 7**, 8**) · Seria 448 (modele 7**, 8**)

EinPAS 28 Sistem confort/Sistem de asistenţă şofer › 28.15 Asistent parcare › 28.15.12 Senzor/Comutator/Cablaj — Seria 447 (modele 6**, 7**, 8**) · Seria 448 (modele 7**, 8**)

AR54.65-S-0001-02E

Remove/install sensors for center Parktronic system (PTS) in front bumper

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Model

447.6/7, 448.7

with code EZ7 (Active Parking Assist)

Model

447.8, 448.8

with code EZ7 (Active Parking Assist)

except code PS2 (AMG line)

Remove/install sensors for center Parktronic system (PTS) in front bumper
Remove/install sensors for center Parktronic system (PTS) in front bumper

1

Disconnect electrical connection at PARKTRONIC sensor, center left front (B8/17) or PARKTRONIC sensor, center right front (B8/20).


S54.65-4566-01

S54.65-4633-01

2

Carefully press catch hooks (arrows) outwards and pull left front center Parktronic sensor (B8/17) or right front center Parktronic sensor (B8/20) out of the guide.

Installation: Convert decoupling ring (1) when replacing left front center PARKTRONIC sensor (B8/17) or right front center PARKTRONIC sensor (B8/20).
Check decoupling ring (1) for damage.

If the decoupling ring (1) is damaged,

replace decoupling ring (1).

3

Install in the reverse order.

Documente menționate