ar5425p3260a

Removing and installing light module

Tip ar · temă 54.25 · versiune 0105 · 1999-01-08

Valabil pentru: MODEL 208, 210

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 2 Sistem de rulare › 54 Instalaţie electrică, echipament şi instrumente › 54.25 Comutator — Seria 208 · Seria 210

EinPAS 30 Instalaţie de iluminat › 30.15 Sistem de iluminare exterior › 30.15.11 Calculator/Releu — Seria 208 · Seria 210

EinPAS 30 Instalaţie de iluminat › 30.15 Sistem de iluminare exterior › 30.15.12 Senzor/Comutator/Cablaj — Seria 208 · Seria 210

AR54.25-P-3260A

Removing and installing light module

8.11.94

MODEL 208, 210

Removing and installing light module

P54.25-0214-06

Illustrated on model 210

1 Cover

3 Screw

4 Electrical connections

5 Screw

N7-1 Light module

Removal, installation

1

Disconnect ground cable from battery

Insulate terminal on ground cable to prevent unintentional contact between disconnected ground cable and ground W10.

AR54.10-P-0003A

2

Unhook control cable on release lever for parking brake and remove release lever guide

Installation: Clip release lever guide into mount on light module housing opposite direction of forward motion

3.1

Remove bottom section of instrument panel (driver's side)

Model 208

AR68.10-P-1505K

3.2

Remove cover below instrument panel (driver's side)

Model 210

AR68.10-P-1500F

4

Unhook and disconnect electrical connections (4) on rear of light module (N7-1)

Installation: Complete electrical connections only after installing light module

5

Unscrew screws (3, 5)

Installation: First screw in screw (3) in area of parking brake release lever. While screwing in support light module from below with hand and align on hole for second screw

6

Remove light module (N7/1) from instrument panel

Assignments and lead connections for fuse blocks:

Model 208

GF54.15-P-1255EF

Model 210

GF54.15-P-1255EA

7

Reinstall in opposite order

Documente menționate